> ## Content Index > Fetch the complete content index at: https://topographer-com.ghost.io/llms.txt > Use this file to discover other available public pages before exploring further. # How to Import Terrain into Archicad from XYZ Survey Data - URL: https://topographer-com.ghost.io/how-to-import-terrain-into-archicad-from-xyz-survey-data/ - Published: 2026-08-07T07:49:25.000Z - Updated: 2026-08-07T07:49:25.000Z - Author: Aki Olafsson An accurate 3D site surface is one of the most critical first steps in any BIM workflow. Whether you are designing stepped foundations, checking retaining walls, or analysing cut-and-fill volumes, flat 2D site plans lead to costly mistakes on site. Archicad's built-in **Mesh Tool** handles 3D topography natively, but uncleaned point clouds and manually traced contours produce bloated files, sluggish navigation, and inaccurate levels. This guide shows you **how to import terrain into Archicad** using clean XYZ data, how to handle real-world coordinates and the Survey Point, and how to keep your site model fast. \--- ## Why Import Elevation Points Instead of 2D Contours? Importing raw point data (XYZ or TXT) offers three advantages over tracing contours: 1. **Higher vertical precision** — LiDAR and official survey points carry real X, Y, Z coordinates without the rounding errors of traced contours. 2. **Lighter geometry** — Triangulating directly from points lets you control node density, avoiding redundant polygon faces from spline contours. 3. **True DTM representation** — Digital Terrain Model data reflects bare-earth surface, eliminating tree canopy and temporary structures. \--- ## File Formats Archicad Supports for Terrain Import | Format | Import Method | Use Case | | :--- | :--- | :--- | | **.TXT / .XYZ** | \`File > Interoperability > Place Mesh from Surveyors' Data\` | LiDAR grids, DTM data, spot levels | | **.CSV** | Rename to \`.xyz\` first, then use the same command | Spreadsheet-exported point data | | **.DWG / .DXF** | \`File > Interoperability > Merge\` | Surveyor 2D/3D CAD site plans | | **.IFC** | \`File > Interoperability > Merge\` or Hotlink | BIM files with \`IfcSite\` | ### A Note on CSV Files Archicad's file browser for the surveyors' data command only filters for \`.txt\` and \`.xyz\`. **If your data was exported as \`.csv\` from Excel or QGIS, rename it to \`.xyz\` before importing.** The parser handles the separators fine, but the dialog won't show \`.csv\` files at all. One quirk: Archicad **fails to parse** any file that uses the same character as both field separator and decimal marker. Danish or Icelandic exports with commas for both (\`524310,50, 181200,25, 42,50\`) will not import. Use periods for decimals, or switch to tabs or semicolons, before renaming. \--- ## Pre-Import Checklist ### 1\. Verify Units Confirm your surveyor's units. Easting, Northing, and Elevation are usually in **metres**. You'll set the conversion in the import dialog. ### 2\. Understand Project Base Point vs Survey Point Georeferenced coordinates often contain huge numbers (e.g. E: 524,310.50). Placing geometry hundreds of kilometres from Archicad's **Project Origin (0,0,0)** causes graphic glitches, clipping, and unreliable snapping. Archicad provides two references: - **Project Base Point (0,0,0)** — the internal origin; keep your building close to it. - **Survey Point** — a secondary reference storing real-world coordinates for IFC georeferencing. **Critical caveat:** The \`Place Mesh from Surveyors' Data\` command **always references the Project Base Point, not the Survey Point.** Even if the Survey Point is configured correctly, imported meshes land relative to (0,0,0). This is confirmed on the [Graphisoft Community forums](https://community.graphisoft.com/t5/Modeling/Importing-Surveyors-Data-into-Archicad/td-p/684066?ref=topographer-com.ghost.io) and has not changed for many versions. **Workaround:** Pre-offset your XYZ data (subtract the survey origin from every X and Y), or move the mesh manually after import. For origin management background, see the [Archicad Survey Point documentation](https://community.graphisoft.com/t5/Setup-License-articles/Survey-Point-in-Archicad/ta-p/303960?ref=topographer-com.ghost.io). \--- ## Step-by-Step: Place Mesh from Surveyors' Data ### Step 1: Prepare Your XYZ File Three numeric columns separated by spaces, tabs, semicolons, or commas: \`\`\`text 524310.50 181200.25 42.50 524312.00 181202.10 42.85 524315.25 181205.00 43.10 \`\`\` Column order: Easting (X), Northing (Y), Elevation (Z). Header rows like \`X Y Z\` are tolerated — Archicad treats any row with non-numeric data as a comment and skips it. What matters is consistent separators that don't clash with your decimal marker. ### Step 2: Run the Import Command Open the project in a **Floor Plan** view and go to **File > Interoperability > Place Mesh from Surveyors' Data**. Select your \`.txt\` or \`.xyz\` file (rename \`.csv\` first) and click **Open**. ### Step 3: Configure the Dialog Archicad asks for three things: 1. **Unit of Measurement** — metres or feet. 2. **Placement** — whether coordinates are absolute or offsets. 3. **Height Above Sea Level** — base elevation reference from \`Options > Project Preferences > Project Location\`. Click **OK**. ### Step 4: Place the Mesh Archicad hands you an insertion cursor. **Click on your floor plan to set the insertion point.** The mesh drops relative to wherever you click — not to the Survey Point, and not automatically to Project Origin. Choose (0,0,0), a building corner, or a specific reference marker. Archicad then generates the 3D Mesh with an elevation node at every point in the file. \--- ## Alternative: Building Terrain from DWG 3D Contours If your survey arrived as an AutoCAD \`.DWG\` with 3D contour lines: 1. **Merge the DWG** onto a dedicated site story via **File > Interoperability > Merge**. 2. **Verify the contours are truly 3D.** Some surveyors deliver flat 2D lines with elevation *labels*. If Z-values are zero, the Magic Wand will flatten your mesh. Check with the LIST command. 3. **Draw a Mesh Boundary** covering your project area with the Mesh Tool. 4. **Use the Magic Wand:** Hold **Spacebar** and click a 3D contour. In the **Add New Points** dialog, choose **Fit to User Ridges** (smooth interpolation) or **Fit to All Ridges** (also considers triangulation). For clean site models, \`Fit to User Ridges\` is usually right. For a full walkthrough, see the [Graphisoft Community article on creating terrain from 2D linework](https://community.graphisoft.com/t5/Modeling/How-to-Create-a-Terrain-with-the-Mesh-Tool-Based-on-a-2D/ta-p/303894?ref=topographer-com.ghost.io). \--- ## 5 Tips for Optimising Archicad Site Meshes ### 1\. Split Ridge Display Between Plan and 3D New meshes show every triangular face in both views. Adjust two separate controls in **Mesh Selection Settings** (\`Ctrl+T\` / \`Cmd+T\`): - **Floor Plan and Section > Outlines > Ridge Selection:** **Show User Defined Ridges**. - **Model > 3D Appearance:** **All Ridges Smooth**. Together these give you clean plans and a smooth 3D surface. ### 2\. Clip Data to the Project Boundary Don't import a 10km × 10km cloud for a 500m² plot. Excess points inflate file size and slow down section generation. ### 3\. Separate Existing Ground from Proposed Grading Keep the raw import on a locked layer (\`3D Terrain - Existing\`), duplicate to \`3D Terrain - Proposed\`, and use **Solid Element Operations** (\`Design > Solid Element Operations\`) with **Subtraction with Upwards Extrusion** to cut foundations and retaining walls cleanly. ### 4\. Set the IFC Classification to IfcSite For OpenBIM handoffs: select the Mesh, open **Classification and Properties**, and set the classification to \`IfcSite\`. IFC exports will carry the terrain under the correct spatial hierarchy. ### 5\. Use the Survey Point for IFC Georeferencing Only Since the surveyors' data command ignores it, don't rely on the Survey Point for import positioning. Use it to store real-world coordinates so IFC exports carry correct georeferencing for civil and GIS workflows. \--- ## FAQ: Importing Terrain into Archicad **Which file formats can Archicad import for terrain data?** Natively \`.txt\` and \`.xyz\` through \`Place Mesh from Surveyors' Data\`. \`.csv\` files must be renamed to \`.xyz\` first. \`.dwg\` and \`.dxf\` files with 3D contours can be traced with the Mesh Tool's Magic Wand, and \`.ifc\` files containing \`IfcSite\` can be merged directly. **Why doesn't my imported mesh align with the Survey Point?** \`Place Mesh from Surveyors' Data\` references the Project Base Point (0,0,0), not the Survey Point. Pre-offset your XYZ data or move the mesh manually after import. **Can I use a comma-separated CSV file directly?** No. Rename it to \`.xyz\` first, and make sure the file doesn't use commas as both field separator and decimal marker. **How do I hide the internal triangulation lines?** Two settings: \`Show User Defined Ridges\` under Floor Plan and Section, and \`All Ridges Smooth\` under Model > 3D Appearance. **What's the best way to cut a building footprint into the terrain?** Duplicate the terrain to a \`Proposed\` layer, then use Solid Element Operations with \`Subtraction with Upwards Extrusion\`. \--- ## The Faster Way: Generate Clean Archicad Terrain with Topo-grapher Cleaning messy CAD surveys, converting coordinates, and clipping unbounded point clouds pulls time from actual design work. [**Topo-grapher**](https://topo-grapher.com/?ref=topographer-com.ghost.io) streamlines the whole workflow: 1. **Define your boundary** on an interactive map viewer. 2. **Export georeferenced XYZ data** from [authoritative elevation datasets](https://topo-grapher.com/elevation-data-coverage.html?ref=topographer-com.ghost.io). 3. **Drop the \`.xyz\` file into Archicad's *Place Mesh from Surveyors' Data* command** for an instant, correctly scaled 3D surface. From feasibility studies to planning applications, our [Archicad terrain workflow](https://topo-grapher.com/topography-for-archicad.html?ref=topographer-com.ghost.io) delivers lightweight, accurate ground models that keep your BIM files fast and reliable. [**Try Topo-grapher today and create clean 3D terrain for Archicad in seconds →**](https://topo-grapher.com/?ref=topographer-com.ghost.io)